PATIENT-SPECIFIC. VERSATILE. PIONEERING.
The APTUS Arthrodesis System 2.0/2.3, 2.5 – a well-thought through portfolio for fusion of the carpal bones and wrist.
The extended Arthrodesis System is based on the multidirectional and angular stable TriLock locking technology and is designed for partial and total arthrodesis. The specially-developed anatomical plates are suited for diverse wrist procedures such as four corner fusion, radioscapholunate fusion (dorsal or volar) and wrist fusion with or without arthrodesis of the carpometacarpal joint.
FEATURES
TriLock – multidirectional angular stability of ± 15° in all directions and in each screw hole*
Minimal screw head protrusion – especially in the metacarpal area – thanks to internal locking contour
Consistent screw diameter of 2.5 mm for intraoperative simplicity
Oblong hole for variable plate positioning and to facilitate axial compression
Chamfered edges and a smooth surface for soft tissue protection
K-wire holes to assist with temporary plate fixation
Plates are compatible with the screws and instruments of the APTUS Wrist Radius System 2.5
* Exception: oblong hole
COLOR CODE
Purple: APTUS 2.5
Acesse aqui para mais informações técnicasO post APTUS® Wrist TriLock Total Wrist Fusion Plates 2.5 apareceu primeiro em MedFix.
]]>
FEATURES
Osteotomies can be performed with either a 45° or 90° angle
Chamfered edges and a smooth surface for soft tissue protection
TriLock – multidirectional (± 15°) and angular stable locking technology
Compatible with the screws and instruments of the APTUS Distal Radius System 2.5
COLOR CODE
Purple: APTUS 2.5
O post APTUS® Wrist TriLock Ulna Shortening Plate 2.5 apareceu primeiro em MedFix.
]]>
FEATURES
TriLock – variable angle of ± 15° in all directions in each screw hole *
Rounded edges and a smooth surface for soft tissue protection
Oblong hole for variable plate positioning
K-wire holes for temporary fixation of the plate
Anatomically pre-contoured plate design
* Exception: oblong hole”
COLOR CODE
Purple: APTUS 2.5
O post APTUS® Wrist TriLock Distal Ulna Plates 2.5 apareceu primeiro em MedFix.
]]>
FEATURES
Flap thickness of 0.6 mm, flaps can be bent up to 35°
TriLock – multidirectional angular stability of ± 15° in all directions in each screw hole *
Rounded edges and a smooth surface for soft tissue protection
Oblong hole for variable positioning of the plate
Radiolucent drill guide block available for rapid and easy angulation of screws
K-wire holes for temporary fixation of the plate
* Exception: oblong hole and flaps
COLOR CODE
Purple: APTUS 2.5
O post APTUS® Wrist TriLock Distal Radius Rim Plates 2.5, Volar apareceu primeiro em MedFix.
]]>
FEATURES
TriLock – variable angle of ± 15° in all directions in each screw hole*
TriLockPLUS screw holes combine compression and angular stability in one step
Rounded edges and a smooth surface for soft tissue protection
Oblong hole for variable positioning of the plate
K-wire holes to assist with temporary plate fixation
Buttressing of the RCJ and DRUJ due to the possibility of converging screw placement
Anatomically pre-contoured plate design in the shaft and distal area available in three different lengths
Offset screw holes in the shaft avoid screw collisions
* Exception: oblong hole
COLOR CODE
Purple: APTUS 2.5
O post APTUS® Wrist TriLock Distal Radius Plates XL 2.5, Volar apareceu primeiro em MedFix.
]]>
FEATURES
Hook thickness of 0.6 mm
TriLock – variable angle of ± 15° in all directions in each screw hole *
Rounded edges and a smooth surface for soft tissue protection
Oblong hole for variable positioning of the plate
K-wire holes for temporary fixation of the plate
* Exception: oblong hole
COLOR CODE
Purple: APTUS 2.5
O post APTUS® Wrist TriLock Lunate Facet Plates 2.5, Volar apareceu primeiro em MedFix.
]]>
INGENIOUSLY CURVED. RETHINKING STANDARD PROCEDURES FOR DISTRACTION PLATING.
The two innovative spanning plate options allow different fracture patterns and the varying surgical preferences of surgeons to be easily addressed. The straight plate is designed for placement over the second metacarpal while the anatomically curved plates are optimized for placement over the third metacarpal. This novel design of the ingeniously curved plate helps to facilitate plate positioning and may reduce the entrapment of the extensor pollicis longus tendon due to the coronal bend1. The chamfered and narrowed plate ends facilitate the insertion during surgery. All plates feature a 12° dorsal bend for a neutral hand position, additional screw holes for direct buttressing of the scaphoid or lunate facet and our multidirectional and angular stable TriLock® locking technology.
The APTUS Wrist spanning plates are expressly designed to provide a new standard of care in distal radius fracture treatments requiring internal distraction plating.
FEATURES
Low profile plate designs especially in the distal part of the plate for soft tissue protection
Oblong holes for minor plate adjustments
Consistent screw diameter of 2.5 mm for intraoperative simplicity
TriLock – multidirectional angular stability of ± 15° in all directions and in each screw hole*
K-wire holes to assist with temporary plate fixation
Rounded edges and a smooth surface for soft tissue protection
Plates are compatible with the screws and instruments of the APTUS Wrist Radius System 2.5
* Exception: oblong holes
COLOR CODE
Purple: APTUS 2.5
O post APTUS® Wrist Spanning Plates 2.5 apareceu primeiro em MedFix.
]]>
FEATURES
Low plate profile (0.6 mm) and non-protruding screw heads for soft tissue protection
Self-drilling 1.5 SpeedTip screws for fast and easy insertion
COLOR CODE
Green: APTUS 1.5
O post APTUS® Wrist Hook Plates 1.5 apareceu primeiro em MedFix.
]]>
FEATURES
TriLock – variable angle of ± 15° in all directions in each screw hole*
Oblong holes for variable plate positioning
Buttressing of the RCJ and DRUJ due to the possibility of converging screw placement
Rounded edges and a smooth surface for soft tissue protection
Offset screw holes in the shafts avoid screw collisions
* Exception: oblong hole
COLOR CODE
Purple: APTUS 2.5
O post APTUS® Wrist TriLock Distal Radius Frame Plates 2.5, dorsal apareceu primeiro em MedFix.
]]>
FEATURES
TriLock – variable angle of ± 15° in all directions in each screw hole*
Rounded edges and a smooth surface for soft tissue protection
Oblong hole for variable plate positioning
K-wire holes for temporary fixation of the plate
* Exception: oblong hole
COLOR CODE
Purple: APTUS 2.5
O post APTUS® Wrist TriLock Distal Radius Small Fragment Plates 2.5 apareceu primeiro em MedFix.
]]>